Basecaot BC001
Aplication: Metallic and solid-colour basecoat/clearcoat finishing.Wet-on-wet process with CC006 Clear.
Properties: Very good hiding power, high efficiency.
Remarks: • Mixing formulas with TP005 and mixing bases are available to cover the whole range of colours
needed in automotive refinishing.
• At rather high temperatures or when refinishing large surfaces, it is possible to replaceTH04 byTH03
slow,while replacing TH03 Adjusting base by TH03 slow at the same time.
• Mixtures will keep for up to 6 months when stored in containers or cans coated inside.
• Flash-off times can be reduced significantly by using appropriate air blow equipment.
• When using white colors with high spray viscosity the mixing ratio can be changed to 100 : 80.
| Paint system | RATIO Aqua | |
| Spreading rate: 130 m²/l at 1 µm | ||
|
Mixing ratio
Reducer |
2:1 100% by vol. BC001 /Solids (acc. to mixing formula) 50% by vol. TH03 Adjusting Base * (stir IMMEDIATELY after having added adjusting base) *When using TH04 slow in the mixing formula, TH03 slow must also be used. |
|
|
Spray viscosity DIN 4 at 20°C |
approx. 18-24 s | |
|
Gravity cup Spraying pressure |
HVLP gun: 1.3 mm 2.0-3.0 bar/ 0.7 bar at the nozzle |
Compliant gravity-feed gun 1.3-1.4 mm, 2.0 bar |
| Number of spraycoats | 2 (spray to cover) + ½ to match the effect Film thickness: 10-15 µm | |
| Flash-off at 20°C | Approx. 5 min. after each spraycoat. | |
|
Intermediate drying Drying at 20°C Blow dry with Dry Jet |
Flash off until mat after each spraycoat. | |
| Sanding | Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards. | |
Our products are sold all over the world, you can rest assured.
